Made for the HZL series of JUKI Machines  This presser foot is used for piecing together patchwork with a seam allowance of ¼” (6.4mm). Always ensure needle is set to center straight stitch. Align the edge of the fabric with the presser foot guide...

Made for use with the TL-series of JUKI Machines This presser foot is used for piecing together patchwork with a seam allowance of ¼” (6.5mm).Align the edge of the fabric with the presser foot guide to easily sew with a seam allowance of ¼”The...

Made for use with the TL series of JUKI Machines This presser foot is used for free-motion quilting using a ruler.With a distance of ¼” (6.5mm) from the needle entry point to the outer edge of the presser foot, sew using a ruler as...

Made for use with the TL series of JUKI Machines  This presser foot is used for free-motion quilting. It is also useful as a guide for echo quilting. With a distance of 1/4" (6.5 mm) from the needle entry point to the outer edge,...

Made for use with the TL series of JUKI Machines This presser foot is used for free-motion quilting.  With the feed dog lowered, you can freely move the fabric to draw using stitching. The distance from the needle to the entry point to the...

Made for use with the UX Series (HZL-NX7 and the DX-4000QVP) This presser foot is used for piecing together patchwork with a seam allowance of 7mm.  Always ensure needle is set to center straight stitch. Align the edge of the fabric with the presser foot...

Used for the HZL-NX7 machine  The presser foot joint is necessary when the separately available presser foot that is to be attached after removing the presser foot holder. Presser feet that requires adapter shank: cording and embroidery presser foot, quilt presser foot (open type),...

Made for use with the TL series of JUKI Machines   This foot is used for making gathering. The gathering amount is changed by turning the screw.  This shirring foot is used for making gathering and shirring of sleeve caps. The shirring foot has...

Made for use with the HZL-DX series, HZL-F series and HZL-G series of JUKI machines This presser foot is used for closely sewing along the edges of a zipper or piping cord The position of the adjustable zipper presser foot can be changed over...

Made for use with the HZL-DX7 Juki Machine  This presser foot is used for stitching appliqués or designs. Since the front and back of this presser foot are short and transparent, appliqués and designs are easy to see, and you can easily sew sharp...

Made for use with the UX Series (HZL-NX7 and DX-4000QVP); the HZL-series, and the HZL-F series  This spool pin is used when another thread spool is needed for twin needle sewing or bobbin winding Use this spool pin with a thread spool for twin needle...

Made for use with the HZL-DX series, HZL-F series and HZL-G series of JUKI machines This presser foot is used for materials that do not feed well and are difficult to sew, such as vinyl-coated fabric and leather.  This presser foot, made of fluorocarbon...

Made for use with the HZL-series of sewing machine - PLEASE CHECK YOUR MANUAL FOR COMPATIBILITY This bobbin case is made for the HZL-series of sewing machines, made to hold the clear bobbins designed for the HZL-series. Should you have any issues with your machine,...

Made for use with the TL-series of sewing machines  The bobbin case is designed specifically for the vertical full rotary hook in JUKI’s semi-industrial sewing machines. The latch, which can be opened or closed, allows this vertically bobbin case to easily be inserted into...

Made for use with the UX series (DX-4000QVP and the HZL-NX7), HZL-DX series and the HZL-F series of JUKI machines This presser foot is used for holding a button in place and attaching it using the zig zag stitch Be sure to first lower...

Made for use with the UX series (DX-4000QVP and the HZL-NX7), HZL-DX series and the HZL-F series of JUKI machines   This presser foot is used to automatically sew buttonholes You can sew buttonholes of the appropriate size by simply placing the button in...

Discover the ultimate sewing dream team for your home!With the powerful JUKI TL semi-industrial sewing machine, the fantastic MO overlock serger, and the incredible EB-1 buttonhole device, you’ll achieve professional-quality stitching that will bring joy to your crafting endeavors!EB-1 stitches buttonhole patterns by moving...

Made for use with the UX Series (DX-4000QVP and the HZL-NX7); the HZL-series, the HZL-F series and the HZL-G series  This presser foot is used for patchwork quilting, edge stitching during dressmaking (in the case of sewing waistbands and neckbands) outline quilting and single lap...

Made for use with the TL-series of JUKI Machines This presser foot is used for stabilizing stitching 0.06" (1.5 mm) to the right of a thick seam. It is useful for coverstitching. By guiding the fabric along the left toe (guide) of the presser...

Made for use with the TL-series of JUKI Machines This presser foot is used for stabilizing stitching 0.06" (1.5 mm) to the left of a thick seam. It is useful for coverstitching. By guiding the fabric along the right toe (guide) of the presser...

Made for use with the TL-series of JUKI Machines   With this foot, the sewing machine is able to carry out sewing at 1.5mm position on the left from the stepped portion. In comparison with the standard compensating foot, the front part of this...

Made for use with the TL-series of JUKI Machines This presser foot is used for stabilizing stitching ¼” (6.5mm) to the left of a thick seam. By guiding the fabric along the right toe (guide) of the presser foot, stitching can be sewn ¼”...

Made specifically for HZL-NX7 - needs to be used with the Adapter Shank (click here for the Adapter Shank made by Juki for the HZL-NX7) This presser foot is used for free-motion sewing of cording. This presser foot has a hole for supplying cording to be...

Made for the TL series of JUKI Machines This presser foot is used for free-motion sewing has guidelines useful for echo quilting. The circular guidelines at ¼” (6.5mm) and 5/8” (10mm) from the needle entry point are useful for echo quilting, stitching sewn equally...

Made for use with the TL-series of JUKI Machines. This presser foot is used for stretch fabrics (such as knits), hard-to-feed materials (such as vinyl-coated fabric) and unevenly fed material (such as quilting or fabric with a nap). This presser foot is equipped with...

Made for use with the HZL-NX7, DX and F series of Juki sewing machines This presser foot is used for stretch fabrics (such as knits), hard-to-feed materials (such as vinyl-coated fabric) and unevenly fed material (such as quilting or fabric with a nap). This...

This product is compatible with the HZL and TL series of sewing machines This controller can be used to start/stop sewing and adjust the sewing speed with your foot. Controlling the sewing machine with your foot leaves both of your hands free while sewing....

Made for use with the TL series of JUKI Machines  This presser foot was designed specifically for easily sewing lightweight materials. Since the needle drops into a round opening, this presser foot reduces puckering when sewing lightweight materials and prevents skipped stitches well as...

This one-sided presser foot presses down on only one side of the fabric and is useful for sewing along the edges of zippers and piping. It also allows for thick seams to easily be crossed. Since the needle drops on the right side, this...

Made for use with the TL-series of JUKI Machines With this piping foot, the sewing machine is able to make piping cords with ease without using an iron and adhesive interlining. This piping foot can be widely used for sewing edges of bags and...

Made for use with the TL-series of JUKI Machines This narrow hinged presser foot is useful for sewing zippers and narrow pieces. The narrow width of 3 mm from the needle to the edge of the presser foot is perfect for sewing narrow pieces. ...

Made for use with the TL-series of JUKI Machines This presser is best-suited to sewing zippers. With this foot, it can be performed to sew the verge of material when attaching zippers, sewing edges or attaching D-rings. It is also used for ensuring the...

Made for use with the TL-series of JUKI Machines This presser foot is used for inserting a concealed zipper. Since this presser foot lifts the teeth of the zipper as they are fed through the groove along the bottom of the presser foot, you...

Made for use with the TL-series of JUKI Machines This presser foot is used for inserting a concealed zipper. Since this presser foot lifts the teeth of the zipper as they are fed through the groove along the bottom of the presser foot, you...

Exceed your sewing and quilting expectations with the HZL- F600! This computerized household machine incorporates JUKI’s industrial sewing machine technology to produce superior stitch quality and sewing performance. Equipped with 225 stitches including 16 professional buttonholes, 4 lettering fonts, and a huge selection of...

Made for use with the TL-series of JUKI sewing machines  This bobbin is designed specifically for the vertically full rotary hook in JUKI’s semi-professional sewing machines. A notch allows this bobbin to be placed on the bobbin winding shaft. Should you purchase 10 or...

This T-Shaped Screwdriver is perfect for removing those throat plate screws, should you need to replace or switch out your throat plates!   ITEM CODE: A91107000000

Made for use with the TL series of JUKI Machines  This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. A magnet allows you to easily reposition the gauge. A strong magnet holds this...

Need perfect stitching for your project? Look no further! JUKI's Mini Ruler Set is made to be used with their Quilting Foot for perfect stitching for your projects!  This set includes:  Small S Shape Mini Bird Small Feather Tool Nested Mini Diamond Straight Line...

Made for use with the HZL-DX7 sewing machine from Juki This presser foot is used for sewing the very edge of the zipper, and sewing piping and D-ring that has more height than the fabrics. Since the width of the narrow zipper foot is...

Made for use with the HZL-DX7 This presser foot is used for stitching appliqués or design The wide opening at the front of this presser foot makes appliqués and designs easy to see, which is useful for curvy decorative stitching. The groove along the...

Made for use with the TL-series of JUKI Machines. This presser foot for free-motion sewing is open at the front so that the needle area is easy to see. Since the presser foot moves up and down together with the movement of the needle,...

Made for use with the TL-series of Juki Machines This presser foot for free-motion sewing is open at the front so that the needle area is easy to see. It is used for free-motion sewing when the sewing machine is positioned longitudinally. This presser...

Made for use with the UX series (DX-4000QVP and the HZL-NX7), HZL-DX series and the HZL-F series of JUKI machines This presser foot is used to sew overcasting in order to prevent the cut edges of fabric from fraying.Sew with the edges of the...

Made for the HZL-NX7 model of JUKI machinesThis presser foot is used for piecing together patchwork with a seam allowance of 1/4" (6.4mm) or 1/8" (3.2mm). Always ensure needle is set to center straight stitch. Align the edge of the fabric with the outer...

Made for use with the TL-series of JUKI Machines This presser foot is used for creating piping and sewing it on. The groove that the cord passes through has a diameter of about 3 mm. This presser foot is used for sewing piping on...

Made for use with the UX Series (DX-4000QVP and HZL-NX7) This presser foot is used for piecing together patchwork with a seam allowance of 7mm.  Always ensure needle is set to center straight stitch. Align the edge of the fabric with the presser foot guide...

Made for the HZL-NX7 model of JUKI machinesThis guide is used for sewing equally spaced rows of stitching.Insert this guide into the hole of the presser foot holder or the walking foot, and then sew while lightly tracing this guide along stitching.Adjust the spacing...

Made for use with the TL series of JUKI Machines  This guide is used for sewing parallel rows of stitching that are equally spaced. This guide, installed on either side of the needle, can be used for stitching on either the left or right...

Made for the HZL-NX7 model of JUKI machinesThis presser foot is used for free motion quilting. Always use an adapter shank with the quilt presser foot for the HZL-NX7ITEM NUMBER: 402-24352