





JUKI LU-1560N Double Needle Unison Feed Walking Foot Industrial Sewing Machine
- $6,499.00
$8,499.00- $6,499.00
- Unit price
- per
All About Sewing Online Catalogue Fulfillment Store.
The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes.
Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches.
The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of material.
The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.
With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.
The high, 16mm (13mm for LU-1565N) presser foot lift enables easy material handling.
With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.
The standard 2-needle type machine that delivers the basic functions and performance best suited to the sewing of heavy materials. Automatic lubricating mechanism improves maintainability. The sub oil pan and double filter prevent dust from entering the oil.
Since the needle thread tension-release solenoid is fitted on the rear face of the machine head, the area around the needle entry and one-touch type reverse feed button is easily viewable. This substantially contributes to improved operability.
The machine leaves a shorter needle thread after thread trimming, improving thread consumption efficiency. With a rigid knife and improved cam shape, the thread trimmer cuts thread as thick as #5 without fail.
With just a light press on the one-touch type reverse feed button, reverse feed stitching is actuated. Furthermore if a suspended ruler is attached on the machine or a 3-dimensional sewing product is sewn, the button can be shifted upward to prevent interruption. The auto-lifter (pedal switch type) helps to increase efficiency by reducing operator fatigue.
The 1-needle type machine is equipped with a bottom-feed micro-adjustment mechanism with the needle feed amount fixed. This helps prevent irregular stitches which are free from pitch errors.
LU-1560N
Heavy-weight
2,500 sti/min
9mm (forward/backward)
36mm
By hand: 9mm, By knee: 16mm (max.)
Option
4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm(3/16, 1/4, 5/16, 3/8, 1/2)
2.5~6.5mm
Slide Type
Vertical-axis double-capacity hook
135×17 (Nm160) Nm125~Nm180
#30~#5, B46~B138, Nm=60/3~20/3
Rectangular Feed
Single-tension method
By dial
Built on the machine head
Built on the machine head
Provided as standard (reset with the push of a button)
Automatic
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
255mm
517mm×178mm
45kg
Option
LU-1560N
Heavy-weight
2,500 sti/min
9mm (forward/backward)
36mm
By hand: 9mm, By knee: 16mm (max.)
Option
4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm(3/16, 1/4, 5/16, 3/8, 1/2)
2.5~6.5mm
Slide Type
Vertical-axis double-capacity hook
135×17 (Nm160) Nm125~Nm180
#30~#5, B46~B138, Nm=60/3~20/3
Rectangular Feed
Single-tension method
By dial
Built on the machine head
Built on the machine head
Provided as standard (reset with the push of a button)
Automatic
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
255mm
517mm×178mm
45kg
Option
Return / Refund Policy
Domestic Machines: Within 30 days of original purchase date in original packaging and an RMA #. Opened machines will be subject to a 35% restocking fee. Please contact All About Sewing to coordinate an RMA#
Industrial Machines: All Industrial machines (Juki, Ricoma, Rugged, Kobe) are Final Sale. Exchange/Upgrade will be subject to approval. Please contact All About Sewing to coordinate.
Click here for full refund policy.
Thanks for subscribing!
This email has been registered!